rocketdiagram
Public Missiles Ltd

Quantum Tube

These great airframe tubes are made in the USA from a special blended polymer that is extremely durable and easy to use. Quantum Tube can be squeezed, dropped, or even thrown and will not suffer any damage as can sometimes occur to cardboard or phenolic tube. You will find this new material easy to work with and very forgiving, even duringthose “less than perfect” flights. All components that fit PML phenolic tubing fit QT also.

Quantum Tube airframes are the best choice for most sport rocketry applications. QT is very easy to work with and finish, with no spiral grooves to fill. It’s very strong for most rocket flying, and is also very forgiving to the impacts of rough landings. However, QT is NOT a replacement for fiberglassed phenolic; it is simply an easier-to-use material in applications that do not require the specific features of phenolic. PML parts such as nosecones, centering rings, couplers, etc., all fit QT just as well as they fit phenolic.

Free delivery to Perth metro area only 

Cirrus (in stock)
!
This high velocity, 38mm minimum diameter dart is capable of extremely high altitudes with relatively small motors. Perfect for "H" and "I" class altitude attempts.

The Cirrus Dart is a specialized super-high-performance kit and should only be used by experienced high power fliers.

The Cirrus comes with...

  • Pre-slotted phenolic airframe
  • G-10 fiberglass fins
  • Pre-weighted solid nosecone
  • 7.5" Payload Bay
  • Piston ejection system
  • Ultra-light nylon parachute
  • Pre-cut 6 oz fiberglass reinforcement cloth
  • Explicit instructions

Don`t let its small size fool you, this is NOT a "model" rocket! In fact this rocket can attain higher altitudes than a 4 inch diameter rocket using a "K" motor; and at a small fraction of the cost. Think about it... If recording the highest altitude is your goal, why would you put a 2-ounce altimeter measuring 1.5" x 4" in a 20 pound behemoth to attain a lower altitude? See the Motor Specifications Chart in the Spec Sheet section of our website for performance information. This is not a "Skill Level 1" rocket kit. To keep a high velocity, minimum diameter rocket like this together during flight, several important construction steps must be strictly adhered to. But don`t worry, everything you need (except for adhesives and paint) is supplied with the kit. Very explicit, step-by-step instructions are supplied as well. 20 minute Finish Cure Epoxy (EPY-FINISHING) will be required in addition to your regular 5 minute epoxy (EPY-5MIN). A HAMR motor retainer is not recommended for the Cirrus kit as it will disturb the airflow by projecting beyond the sides of the airframe, negatively impacting the purpose of the Cirrus, low drag and high altitude.

lo 29mm
!
Larger picture

The Io is 2.1" ID and stands 33" tall. This kit weighs approximately 23 oz. It is intended to be flown on F, G & H motors. It`s the perfect rocket for people new to high power! If you choose to purchase the Io with a 38mm MMT, for 29mm motors, purchase the optional ADPTR-38/29.

Piston ejection system
Heavy duty nylon parachute
Pre-slotted Quantum Tube airframe
Plastic nose cone
29mm motor mount

lo 38mm
!
The lo kit with 38mm motor mount.

Phobos 29mm (instock)
!
Larger picture

The Phobos is 2.1" ID, standing 57" tall and weighs approximately 32 oz. With its 12" payload section, it can loft a payload to thousands of feet on G and H motors. If you choose to purchase the Phobos with a 38mm MMT, for 29mm motors, purchase the optional adapter

 

  • Piston ejection system
  • Heavy duty nylon parachute
  • Pre-slotted Quantum Tube airframe
  • Plastic nose cone
  • 29mm motor mount
  • 12" Payload bay

Phobos 38mm (instock)
!
The Phobos kit with 38mm motor mount.

Small Endeavour (instock)
!
Larger picture

The newest and smallest of our famous Endeavour Series rocket kits.The Endeavour`s military style split fin design has always been a big hit with the HPR crowd.

Now you can fly in style using mid power motors, too! The Small Endeavour comes standard with the new Quantum Tube polymer airframe and G-10 fins. The Small Endeavour uses a 38mm motor mount (or an optional adapter for 29mm flights). This rocket will fly to some very respectable altitudes using G through I power!

  • Piston Ejection System
  • Heavy-Duty Nylon Parachute
  • Pre-Slotted Quantum Tube Airframe
  • Plastic Nosecone
  • 38mm Motor Mount

Explorer 29mm (instock)
!
Larger picture

This four-foot sport flier is easy to build and fun to fly.

Another perfect Level 1 certification kit! Uses PML`s 2.5 inch pre-slotted Quantum Tube airframe and G-10 fiberglass fins. Soars to thousands of feet with G through I motors. If you choose to purchase the Explorer with a 38mm MMT, for 29mm motors, purchase the optional adapter.

Explorer 38mm (instock)
!
The Explorer kit with 38mm motor mount.

Callisto 29mm (in stock)
!
Larger picture

The Callisto is 2.1" ID, standing almost 46" tall. This kit weighs approximately 25 oz. It flies great with high impulse F, G and even H motors. Perfect for Level 1 Certification flights. If you choose to purchase the Callisto with a 38mm MMT, for 29mm motors, purchase the optional adapter

 

  • Piston ejection system
  • Heavy duty nylon parachute
  • Pre-slotted Quantum Tube airframe
  • Plastic nose cone
  • 29mm motor mount

Callisto 38mm (in stock)
!
The callisto kit with 38mm motor mount.