WRL Rocketry

ICED UP MODEL ROCKET KIT comes with a full set of colorful sticker decals for exact placement, 3 pre-cut balsa fins and uses a 1/8" launch rod.  Rocket is over 18" tall and soars to 800ft.  Uses the Estes BT-50 type rocket tube.  This is a cool, easy to paint rocket.  All you have to do is paint the nose cone purple and the rocket tube white. Includes a 12" parachute for safe recover.  So, order yours today and have some high flying fun!  Use the Estes type rocket motors: A8-3 for 90Ft., B4-4 for 290Ft., B6-4 for 300Ft. and the C6-5 for 850Ft.

SPOOKTACULAR MODEL ROCKET KIT  is a cool bat looking rocket for the month of October, but fly it anytime and impress your friends!  Comes with cool looking sticker decal set for easy placement! Rocket uses the BT-55 rocket tube and comes with a 18" colorful parachute.  Rocket uses the Estes rocket motors and the following sizes can be used in this kit.  Estes rocket motor A8-3 for 120Ft. flights.  B4-4 for 316Ft, B6-4 for 317Ft. and for high flights use the C6-5 for 720Ft.  Rocket uses the 1/8"
launch rod, so you can use just about any launch pad on the market.  Easy to build 3 fin rocket that looks like bat wings.  All fins are pre-cut and the directions are easy to use.  Rocket comes with a plastic nose cone and very cool water slide decals.  Buy this cool bat rocket and have some high flying fun!

BIO HAZARD II Model rocket kit comes complete with pre-cut balsa fins, full set of colorful stickers  and picture oriented directions for easy assembly.  This is a 3 engine cluster rocket so it is advised that a car battery or motorcycle type battery be used to ignite the motors.  The rocket is a single stage type with parachute recovery.  It use the Estes type C11-3, D12-7 and E9-6 type motors.  The launch lug is 1/4" so you will need to use the Estes "E" launch pad.  
Rocket motor tubes are foil lined for ease of use and durability.  Check this cool rocket kit out, you won't be disappointed. Order today! 

STORMY SKIES MODEL ROCKET KIT comes with a full set of colorful sticker decals for exact placement, 4 pre-cut balsa fins and uses a 1/8" launch rod.  Rocket is over 18" tall and soars to 800ft.  Uses the Estes BT-50 type rocket tube.  This is a cool, easy to paint rocket.  All you have to do is paint the nose cone black and the rocket tube white.  The base of the rocket tube black and that is it.  Includes a 12" parachute for safe recover.  So, order yours today and have some high flying fun!  Use the Estes type rocket motors: A8-3 for 90Ft., B4-4 for 290Ft., B6-4 for 300Ft. and the C6-5 for 850Ft.

ECLIPSE Model rocket kit comes complete with pre-cut balsa fins, full set of grey scale stickers and picture oriented directions for easy assembly.  This is a 3 engine cluster rocket so it is advised that a car battery or motorcycle type battery be used to ignite the motors.  The rocket is a single stage type with parachute recovery.  It use the Estes type C11-3, D12-7 and E9-6 type motors.  The launch lug is 1/4" so you will need to use the Estes "E" launch pad.  
Rocket motor tubes are foil lined for ease of use and durability.  Check this cool rocket kit out, you won't be disappointed. Order today! 

ORION STAR TRANSPORT KIT.  We finally have it finished and tested.  This is a real winner, and it will get you noticed at the launches.  All you have to do is paint this entire rocket glossy white and apply the decals to get this cool rocket look.  The rocket is skill level 4 simply because the decals are a full body wrap and require some skill.  This rocket will fly using any 24mm rocket motor.  When using an Estes D12 motor the rocket gracefully lifts of the pad for a slow flight upward!  The launch lug is a 3/16" diameter so you can use the Estes pad with the bigger rod to fly it.  Kit comes with plastic nose cones and pre-cut balsa fins.  The motor mounts are laser cut for precision.  Recovery is a parachute in bright red with a swivel to help keep tangles out.  Engine tube is foiled lined for better heat dissapation

Kit Specifications:

Skill Level 4: Previous Experience Suggested
Length: 36.50 in (92.7 cm)
Diameter: 1.637 in (4.20 mm)
Weight (without motor): 5.0 oz (141.74 g)
Recovery: 24 inch Plastic Parachute
Decals Type: Water-slide

THE GNAT MODEL ROCKET KIT comes with a full set of colorful stickers so all you have to do is paint your rocket white and the nose cone black to get the look!  Rocket uses the Estes small "A" type engines to cut your launch costs down.  Uses a 1/8" launch lug for the most common launch pad out there.  The gnat comes with picture oriented directions for ease of assembly.  Balsa pre-cut fins and a plastic nose cone!  This is one cool small rocket to impress your friends with.  The following Estes type engines are used: 1/4A-3T for 100Ft., 1/2A3-4T for 270Ft., A3-4T for 500Ft. flights!  These engines usually come in 4 packs so you can have more flights with this rocket for less money.  Uses a 11" pink streamer for recovery.  Rocket is over 11" tall.  Rocket has 3 fins. Order your Gnat today!

Kit Specifications:

Skill Level 1 - Easy to Construct and Fly!
Length: 28.7 cm (11.325")
Diameter: 18 mm (0.708")
Empty Wt: 19.4 g (0.68 oz)
Recovery Type: 11" Plastic Streamer

Order this awesome 2 engine 24mm cluster rocket and have some real fun!  This rocket is very easy to build and fly.  You get (2)  24mm foil lined engine tubes and laser cut black fiber centering rings.  Kit also includes (3)  1/8" thick pre-cut fin set so all you have to do is some light sanding.  Launch lug size is 1/4" so you can use it on the "E" size launch pad that Estes sells.   Hefty shock cord and Plastic nose cone for ease of assembly.  Rocket uses the BT-80 size main rocket tube.  The parachute is 32" and includes a swivel and heavy duty string and gromments.  Easy to follow directions with lots of pictures included.  To finish off your rocket, just paint it white and the nose cone orange, the rest of the artwork is in a glossy sticker set for easy of application.  You can use the Estes D12 and E9 engines, but any 24mm engine will work fine.  Engine tubes are designed to accept any engine that runs 3.75" in length.  To fly it with Estes D12's you will need an 1" spacer.  Order yours today! 

Kit Specifications:

Skill Level 3: Previous Experience Suggested
Length: 42.40 in (107.7 cm)
Diameter: 2.60 in (60.039 mm)
Weight (without motor): 11.30 oz (334.18 g)
Recovery: 32 inch Plastic Parachute
Decals Type: Glossy sticker set.

STRATUS ONE custom rocket kit.  This is a cool looking rocket that you can set up to fly high or low depending on the launch site.  The kit comes complete with a real sharp set of sticker decals.  All you have to do is paint the rocket white and the nose cone silver!  It is that easy to make this sharp looking rocket.  The engine mount houses (2) 18mm type Estes engines.  You can pair up the A8-3 engine for 150ft. flights or the B4-4 for 400ft. flights and the mighty C6-5 for up to 800ft. flights.  The rocket uses a 3/16"launch lug so you can use your Estes pad.  Picture oriented directions aid in quick easy assembly.  The rocket comes with a  24" parachute with swivel for tangle free recovery