Avionics Bay Kits and switches

Arming Switch (instock)
!
Larger picture
Screw type arming switch easy to use perfect for all your altimeters, timers, or transmitters needs.

3.9 Avionics Bay Kit (instock)
!
Larger picture
3.9 Avionics Bay Kit with arming switch
3.9" bay is 12" long, for mounting of altimeters, timers, or transmitters.
Stepped Aircraft Plywood endcaps minimize the chance of ejection gas leakage into the bay.
Now comes with improved screw type arming switch pictured below. 4" length of airframe provides the perfect place to mount the altimeter arming switch.
Comes complete with hardware and detailed instructions.
Includes arming decal for the switch position.
Note: These bay kits fit Binder Design or BSD tubing only. They can be retrofit to other manufacturers tubing, but not without some work on your part. If you decide to try this, it is at your own risk.

2.6 Avionics Bay Kit with arming switch

!
Larger picture
2.6" Avionics bay with arming switch is 10" long for mounting of altimeters, timers, or transmitters.
Stepped Aircraft Plywood endcaps minimize the chance of ejection gas leakage into the bay.
Now comes with improved screw type arming switch pictured below. 4" length of airframe provides the perfect place to mount the altimeter arming switch.
Comes complete with hardware and detailed instructions.
Includes arming decal for the switch position.
Note: These bay kits fit Binder Design or BSD tubing only. They can be retrofit to other manufacturers tubing, but not without some work on your part. If you decide to try this, it is at your own risk.

PML CPR3000 (2.1 kit)
!
Larger picture

Heres what you get:

  • Complete altimeter bay assembly.
  • Complete Threaded Airframe Coupler assembly made from 6061 aluminum with a blue anodized finish.
  • All mounting hardware for the PML Co-Pilot or Transolve P6 altimeter. Mounts for Transolve P5 or P4 and Adept ALTS-25 altimeters sold separately below as CPR2K-FAM and -AAM.
  • One set of fore and aft altimeter mount sealing O-rings provided; see CPR3K-OR-PK below for more information.
  • Two complete ejection systems including charge canisters and holders. (Designed for E-matches. Charge cylinders for flash bulbs sold separately.)
  • Dual piston systems.
  • Drogue chute (or streamer) with tubular nylon shock cord.
  • External safety switch and lead wires.
  • 16-page fully illustrated comprehensive assembly and user manual.
More information on the CPR3000 nad CPRMAX can be found on the Public Missiles web site.

CPR 3000 (2.5 kit)
!
Same as above.

CPR 3000 (3.0 kit)
!
Same as above.

CPR 3000 (3.9 kit)
!
Same as above.